Cartridge flush & Nozzle Refresh Cleaning fluid

Jet Tec print head cleaning fluid is used to rejuvenate old dried up printheads and keep them working at optimum performance.

Simply wet a tissue and dab clean a lightly clogged head. For heavier ink encrusting, soak the printhead in a small pool of solution. Can be applied directly to the pads in the printer.

There are two types of cleaning fluid available. Nozzle Refresh is the original standard cleaner while the newer Cartridge Flush contains extra surfactants that target dried pigment and dye to give a better clean.


Flush 1, 2, 5 & 20 Litre.

Using the Cartridge Flush - as a printhead cleaner

The cartridge flush is designed primarily to clean dried ink from the printhead.

Printer cartridges from manufacturers such as Hewlett Packard, Lexmark, Canon and Olivetti have the printhead on the cartridge.
This can be identified by an electrical circuit on one end of the cartridge.

The Cartridge Flush can be used to clean these printheads. Simply pour some Flush onto a lint free cloth and gently wipe away the dried ink from the printhead.

One of the best methods to clean a printhead that has been left to dry up for a while is to soak the printhead in a small amount of flush.

Simply pour a small amount of flush into a shallow receptacle and set the cartridge printhead in the liquid. Leave the printhead to soak for 2-3 hours. The flush will eventually begin to break down the dried clogged ink allowing the printhead to be wiped clean and used again.

It is important to ensure that the printhead is handled extremely carefully.

Code R9 = 2 x 30ml bottles

Refresh 1, 2, 5 & 20 Litre.