Jet Tec refill kits

Here is what some of the 50 Plus stores in Australia say about the CT-16 Tester

SPEED.....MUCH FASTER TESTING !

"The CT-16 takes about 12 - 15 seconds to do a print test. Regular printers can take up to 2 minutes to load and prime and then the cartridge may need to be re tested again and again."

Add up how many test prints you do in a day a look at the time saved. You can test 4 - 8 cartridges on the CT-16 in the same time it takes to test 1 cartridge on a normal printer. Even more important when the customer is waiting.

RELIABLE

"We had another brand cartridge tester before, the cartridge clips kept breaking on it and the parts took more than 6 months to get replaced. The CT-16 has a solid jig that the cartridge fits in, it's faster and far more reliable. The old machine didn't test as many cartridges and also wasn't upgradeable"

A full spare part kit for the CT-16 is kept in Australia.

PRE CHECK

"We do a pre fill electronics check to see if the cartridge is worth filling . This has saved us a lot of time and ink when we used to fill and try to get a cartridge to work that was electrically never going to work "

"We pre fill cartridges and do a swap out when the customer brings in their empty cartridge. Now we do an electronic check and charge a bit more money if the cartridge the customer brings in is electronically bad, we find that customers also treat the empties a bit better if they know they can save more with a cartridge in good condition"

All adds up to a saving in time and money.

SPACE SAVER

"I got rid of 3 racks of printers and turned that area into production area for filling some Epson cartridges and an area for sorting orders and deliveries "

One shelf, One Machine, 82 cartridges tested.

CONVENIENT

"A number of my printers were breaking down and I was finding it harder to find replacement printers on E-Bay and Cash Converters that work. I would replace one printer and then another one would die and I would need to find another replacement."

Save time on looking for test printers.

CUSTOMER CONTACT

"The CT-16 looks impressive, we have it right out front in the store and can test in front of the customer. No more running out the back and disappearing for minutes on end while I waited for the normal printer to run a test or two. I think it gives our customers more confidence when they can see me test their cartridge right in front of them and I am not leaving the shop unattended."

The CT-16 looks more professional.

STAFF SAVER

"It's easier to train a new staff member how to test a cartridge. All the cartridge types and where they go are clearly printed on the top of the CT-16. Before they would wander around the printer racks trying to work out which printer to test the cartridge in and then ask me"

Easy for beginners

MORE DETAIL


Here is what some of the 50 Plus stores in Australia say about the CT-16 Tester
	SPEED.....MUCH FASTER TESTING ! "The CT-16 takes about 12 - 15 seconds to do a print test. Regular printers can take up to 2 minutes to load and prime and then the cartridge may need to be re tested again and again."
	Add up how many test prints you do in a day a look at the time saved. You can test 4 - 8 cartridges on the CT-16 in the same time it takes to test 1 cartridge on a normal printer. Even more important when the customer is waiting.

	RELIABLE "We had another brand cartridge tester before, the cartridge clips kept breaking on it and the parts took more than 6 months to get replaced. The CT-16 has a solid jig that the cartridge fits in, it's faster and far more reliable. The old machine didn't test as many cartridges and also wasn't upgradeable"
	A full spare part kit for the CT-16 is kept in Australia.

	PRE CHECK "We do a pre fill electronics check to see if the cartridge is worth filling . This has saved us a lot of time and ink when we used to fill and try to get a cartridge to work that was electrically never going to work "

	"We pre fill cartridges and do a swap out when the customer brings in their empty cartridge. Now we do an electronic check and charge a bit more money if the cartridge the customer brings in is electronically bad, we find that customers also treat the empties a bit better if they know they can save more with a cartridge in good condition"
	All adds up to a saving in time and money.

	SPACE SAVER "I got rid of 3 racks of printers and turned that area into production area for filling some Epson cartridges and an area for sorting orders and deliveries "
	One shelf, One Machine, 82 cartridges tested.

	CONVENIENT "A number of my printers were breaking down and I was finding it harder to find replacement printers on E-Bay and Cash Converters that work. I would replace one printer and then another one would die and I would need to find another replacement."
	Save time on looking for test printers.

	CUSTOMER CONTACT "The CT-16 looks impressive, we have it right out front in the store and can test in front of the customer. No more running out the back and disappearing for minutes on end while I waited for the normal printer to run a test or two. I think it gives our customers more confidence when they can see me test their cartridge right in front of them and I am not leaving the shop unattended."
	The CT-16 looks more professional.

	STAFF SAVER "It's easier to train a new staff member how to test a cartridge. All the cartridge types and where they go are clearly printed on the top of the CT-16. Before they would wander around the printer racks trying to work out which printer to test the cartridge in and then ask me"
	Easy for beginners

		MORE DETAIL